Factory Five Racing Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3,217 Posts
There is an oval shaped cutout on the inside panel of the drivers footbox (where it meets the firewall). It is designed as a space for the wires to go into the engine compartment. Just install a little piece of the plastic trim included in the kit. I ran almost all my wiring thru the space there (inside of split loom sheathing with tape at the passthru). Other wires go out front of the passenger footbox top at the 2 1/2 inch hole for the wire harness.

Check the manual for more details.
Ken
 
1 - 1 of 1 Posts
Top