Factory Five Racing Forum banner

1 - 5 of 5 Posts

·
Senior Charter Member
Joined
·
437 Posts
Discussion Starter #1
I'll be using a Tremec 3550 tko and need to know which bellhousing to use (brand,size,model etc.)
If purchasing used, what do I look for? Price range? Mating to 351W. TIA, John
 

·
Premium Member
Joined
·
470 Posts
John, call Mike Forte. He should be able to give you the information and supply the parts you need. He is listed in the vendor section.
 

·
\\\M3
Joined
·
2,299 Posts

·
Premium Member
Joined
·
9,134 Posts
Hi John,
I imagine you're building a FFR. If so and you plan on driving it HARD, I would without a doubt use a steel saftey bellhousing. If it's going to be a fun car without high HP and want to enjoy a fun car, the aluminum Tremec bellhousing is fine. Remember you have nothing between you and the engine/ tranny. Think Safety!!
Mike Forte
Forte's Parts Connection
376 R Cambridge Street
Burlington, MA 01803
781-273-9900
 
1 - 5 of 5 Posts
Top