Factory Five Racing Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
168 Posts
Discussion Starter · #1 ·
Bought the 15:1 Flaming River set, has everything except mounting bushings. Planning on using offset, but solid or poly is the question. What is the driving difference? To be Daily driver with 15" tires (maybe 17" for autocross later).

Thanks in advance,
Gary
 

· Registered
Joined
·
281 Posts
Gary, It depends on your setup. I have the FR 15:1 with 96 spindles and breeze bumpsteer kit to mount on top of spindles and I didn't need offset bushings. I used the stock rubber bushings for now and I don't have any complaints.I was worried if I used solid or poly bushings that I would feel everything in the road. Good luck, Bill
 

· Registered
Joined
·
168 Posts
Discussion Starter · #3 ·
Bill
Thanks for the relpy. I'm using an '89 donor so don't know if the bump steer kit would work,(have notlooked into it)but I do worry with 15:1 and no rubber left in the steering anywhere, it might be rough. Is Breeze helpfull if talk to them?

Thanks,
Gary
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top