Factory Five Racing Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1,051 Posts
Discussion Starter · #1 ·
I NEED SOME HELP WITH THE CORRECT W.P. ROTATION.
The FF manual shows the pump turning clockwise.
The chilton manual shows the pump turning counter clockwise. I bought the pump from summit ( chrome ) so I am assuming that it is standard rotation but I am going back to them and verify the rotation. I am running the stock tentioner and the ff idler pulley. Pictures of the correct routing would be great. Thanks for your help.
jack
 

·
Registered
Joined
·
1,051 Posts
Discussion Starter · #2 ·
i forgot to tell you the engine is an 89 302
jack
 

·
FFCobra Craftsman
Joined
·
784 Posts
Correct rotation for a 5.0 mustange motor is counter clockwise. If your oder was for a replcement 5.0 pump that it should also be a reverse flow pump

Phil
 

·
Registered
Joined
·
1,051 Posts
Discussion Starter · #5 ·
REBEL,
YOU ARE KNOWTHING BUT FAST.
I ON THE OTHER HAND AM ONLY HALF-FAST.
THANKS FOR THE INFO.
JACK
 
1 - 5 of 5 Posts
Top