Factory Five Racing Forum banner

1 - 4 of 4 Posts

·
FFCobra Fanatic
Joined
·
762 Posts
Discussion Starter · #1 ·
http://svo73mm.cjb.net/

This is a a guy that post on corral.net and seems to be the expert there. Maybe we can get a reply from a few experts here on the quality of content. Looks good to me!

Mike
 

·
Premium Member
Joined
·
12,393 Posts
Excellent reading, but now I'm confused. I bought the M2300K brake kit, which comes with SN95 spindles and 2 axles. I also bought the M4006B373 rear end assembly which is complete less axles. The axles from the brake kit fit the rearend and the calipers fit fine, so the parts obviously are meant to be used together. But, apparently there are a few other considerations when choosing wheels, because there are various alternate axles that protrude from the rearend housing by different amounts (I think). Does anyone have info on various axles, like outside-face-to-outside-face measurements that work with certain wheel backsets. I know this ain't rocket science, but I can only buy one set of wheels, so I have to get it right the first time.
 

·
Registered
Joined
·
1 Posts
You can always email me questions.

Basically it comes down to the backspacing of the axles, caliper brackets and rotors.

And no it is not rocket science. just backspacing and axle lengths
 
1 - 4 of 4 Posts
Top