Factory Five Racing Forum banner
1 - 3 of 3 Posts

·
Junior Charter Member
Joined
·
882 Posts
Discussion Starter · #1 ·
So many different setups i have seen in my searches, im not sure what direction to go. Could use some more input.

Here is what i have planned so far:
'85 Mustang in tank pump for carb
FFR supplied 3/8 line to footbox
somekind of addaptor for braided line
to pressure regularor
braided line to carb

What size return line from regulator? 1/2" came up many time in my search. What material (cheap is good!).

WHich regulator?
What fuel filter and would it mount in the FF suggested location?

Thanks for the help
 

·
Heat & Beat Specialist
Joined
·
529 Posts
We used a fram filter. Summit sells a nice one too.


3/8 line should be fine for feed & return. Some people say you need more, but I don't agree. I know guys running 600HP blown motors on the stock 5/16 line in the mustangs.
 

·
Junior Charter Member
Joined
·
882 Posts
Discussion Starter · #3 ·
Thanks for the pic John, that's were i was planning on mounting the filter.
 
1 - 3 of 3 Posts
Top