[2FAST4U]

I know the speedo cable exits that hole, but is there some form of grommet for it?

-Keith

 

[John F]

The real large hole above the MC is for the wire harness The other hole is for the clutch. I'm not sure where the speedo comes out, I'm using the classic electric speedo unit. It might come out of the engine-side top of the footbox. There's a hole there I didn't use.

 

[2FAST4U]

John-

What are you using to fill that 3" hole?

Keith

 

[wnstwolf]

if you told FFR your not using the donor wires they send you a filler plate for all the holes (except that little one in the firewall/drivers box joint)

 

[2FAST4U]

Thanks Joe-

I will look in my assortment of aluminum and see what there is.

-Keith

 

[Rick Williams]

Separate from the boxes but in the manila envelope that had all the paperwork, I found the aluminum plates used to block unused holes in the panels. Check your envelope.

 

[2FAST4U]

Rick-

I totally forgot about the "envelope". Will check it tonight.

Thanks

Keith

 

[rlogan]

I assume you could still request these if you didn't get them...

 

[Doug Huey]

I think I still have the block off plates from FFR. If somebody needs them the first guy to email me his address will own them.

 

[Kenny J]

I just used a chrome plated plug that I got from the hardware cabinets where all the odd hardware is at Home Depot it just snaps in and looks better than the riveted aluminum. Hope this helps!

 

[2FAST4U]

Rick-

I checked the envelope as you suggested......AND THEY WERE THERE!!!

Thanks

-Keith

 

[Hula Master]

The speedo cable exits the footbox from the top right (inside) half. You should have received a grommet for that purpose.

 

[John F]

Kieth, the 3" round hole is filled with the big gromet on the donor harness.

 

[2FAST4U]

John-

I'm going the 'no donor' route.

Keith