Factory Five Racing Forum banner
1 - 5 of 5 Posts

·
Premium Member
Joined
·
9,560 Posts
I'd like to add if the arm that connects to the steering linkage is "dog legged" like the one in the pic then they're 94-95 (preferred) or if straight a 96-04.
 

·
Registered
Joined
·
692 Posts
PBR calipers came on the 99-up Mustangs. To mount them on earlier spindles requires a slight modification of the spindle. 96-up spindles push the wheels out about 1/4" per side. The 94-95 spindles are the preferred part. If you look on the backside of the upright, they should have part numbers that begin with either "F4" or "F5" on them. If they have anything different, they're later ones.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top