Factory Five Racing Forum banner
1 - 1 of 1 Posts

· Building 33 HR #432
Joined
·
194 Posts
Discussion Starter · #1 ·
I am working on installing the chassis harness and would like to see how other builders routed the wiring under the dash. I have found that the supplied harness does not exactly fit the 33 and I have removed most of the convoluted tubing in the dash area trying to get a decent looking lay out. It would be a big help to see how others have done it. I have an inner firewall panel that my ECM is mounted to (LS1/4L60E combo). Not worried about engine/trans wiring just chassis harness under dash. Don't need photos of other wiring like ISIS.
Thanks
Jon
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top