Factory Five Racing Forum banner
1 - 1 of 1 Posts

·
Junior Charter Member
Joined
·
134 Posts
Discussion Starter · #1 ·
Trying to install the passenger seat tonight and have a couple of issues.

1) Second seat I pulled out of the box did not have the plywood bottom. Just the fiberglass, with a feeble attempt to staple the vinyl to it. I mean 90% of the staples got no penetration into the glass. Anyone else have this issue? I'm worried that all the staples will fail and the vinyl will come loose.

2) I opened the seat installation hardware pouch only to find 8 acorn nuts and 4 washers. I was expecting to find at least 4 1 1/2" "screws" similar to what I used to attach the driver side sliders.
 
1 - 1 of 1 Posts
Top