Factory Five Racing Forum banner


6849 Views 64 Replies 20 Participants Last post by  russelljones48
OK, so I received my M4 roadster kit about 2 weeks ago but FFR has back ordered some of the key ingredients needed to get me started. Body is on the buck and frame is on the dolly awaiting said parts.

So, I'm biding my time accumulating the needed bits and pieces. Found a '98 Lincoln M8 IRS yesterday and will pick that up and get it to the re-builder this week. Next up will be mating the TKO600 to the Coyote. Everyone including FFR recommends the QT bell housing but I'm hoping to save a little in this area since the car should never see "explosive" RPMs.

My question? What stock bell housing will work with this combo?
1 - 1 of 65 Posts
I would not try to save money on a bell housing. If you need a TKO600, and you do with a Coyote, you have enough power to explode a clutch.

Best clutch, who knows? There are some things that run in trends around here over the years. There is usually good reason for it. Experience good and bad with a product. The current trend in clutches seems to be RAM.
1 - 1 of 65 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.