Factory Five Racing Forum banner
1 - 16 of 16 Posts

·
Charter Member
Joined
·
7,882 Posts
Local specialty hardware store.
 

·
We know what you're up to
Joined
·
4,700 Posts

·
We know what you're up to
Joined
·
4,700 Posts
Any reason you need to use 1/4" - 28 instead of 1/4" - 20?
Well, I an not an engineer but this is what I was thinking, I could be wrong.

The more threads per inch you have the less steep the thread pitch. The less steep the thread pitch the more torque you can put on it and the less likely it will wiggle free.
 
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top