[MikeD]

I'm trimming the rear harness, and can't tell what two circular plugs are for.

There's a white circular plug (w, b, p/w, p/o, g/o, lb wires) about 1/2 way down rear harness that goes to a grey circular plug that sits beside the two rectangular plugs that connect
to the dash harness.
Here's a picture of the white plug:

It's the only white round plug in the rear harness. Can anybody help?

Thanks in advance.

Mike

 

[wsg_iii]

I believe that is part of the airbag circuit. There should be another plug that looks similar further down the rear harness that plugs into a small black box. That box is one of the crash sensors.

 

[MikeD]

Thanks!

I think I need to keep ONLY the fuel gauge sender, turn signals, brake lights, and the license plate light, right? I'm going carbed 351W, so I'll won't need the the fuel pump wiring. (correct?)

Thanks again!

Mike