Factory Five Racing Forum banner

Rear Axle Housing Brake Line Bracket

1477 Views 16 Replies 8 Participants Last post by  Bill46
So here in CT the DMV requires a bracket every 18 inches of brake line. I am running a Mustang 8.8 rear end with drum brakes and each side is greater than 18 inches. Anyone know of any brackets I could use with this setup?
Thank you
1 - 3 of 17 Posts
Could you use hose clamps to get by inspection?
The rear is pretty thick; you could drill/tap a shallow hole and mount the clips that Craig showed.
Looks like we have a winner!
1 - 3 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.