Factory Five Racing Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
11,847 Posts
Mike is right the rod has to be clean or any foreign material. Only the ball on the end is part of the casting. The rod has to be very straight to go into the MC. We have had to take the pedal bolt loose and rotate it a little to get the pedal and all of the hardware on. Hope this helps. Cheers
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top