Factory Five Racing Forum banner

1 - 6 of 6 Posts

·
Master Paint Chipper
Joined
·
1,374 Posts
Discussion Starter #1
Heys guys,

Well the weather here in CT has been pretty lame for driving lately, so I decided to finally build a set of interior door panels for my car. I basically made them from 1/4 plywood and marine vinyl. Total cost was about $20.00 each, if you don't count my labor :D

Now I have a place to keep my sunglasses, and sun screen.

I pirated the design from several sources on the forum...thanks guys! They're held on with industrial strength velcro.

Here's a few pics...enjoy.

Matt






 

·
FFCobra Fanatic
Joined
·
3,120 Posts
Very clean looking...good job.
 

·
Master Paint Chipper
Joined
·
1,374 Posts
Discussion Starter #4
NG Eddie

I just taped a few sections of plain white paper to the door, and came up with the shape that way. The bottom I left long and used a crayon with no paper on it and rubbed the edge to get the contour right. Then just tranfer it to the plywood or similar material for the backing.

Matt
 

·
Premium Member
Joined
·
5,526 Posts
Great work, It's always nice to see someone spending the time to "do it yourself"
 

·
FFCobra Craftsman
Joined
·
1,784 Posts
Matt,
Those are nice panels! You have a lot of patience and do good work.
Best regards,
Chuck
 
1 - 6 of 6 Posts
Top