Factory Five Racing Forum banner

1 - 4 of 4 Posts

·
FFCobra Master Craftsman
Joined
·
2,078 Posts
Discussion Starter #1
I am about to do the nose aluminum (body is on, but not painted yet). From what I understand, the side pieces just sit on the radiator and are riveted to the 3/4" tubing and the bottom nose piece is what holds the radiator in? Any good pictures of the stock FFR pieces installed with a stock radiator? Thanks,
Doug
 

·
Banned
Joined
·
7,701 Posts
There is one other current discussion on this, and several recently. Search "Radiator Aluminum", and you'll find plenty to look at.

Your assumptions are correct, though. The bottom piece rivets/bolts to the nose of the car (actually, the "floor" of the nose opening), and rivets/bolts to the bottom lip of the radiator.

HTH,

Greg
 

·
FFCobra Master Craftsman
Joined
·
2,078 Posts
Discussion Starter #3
I'll try that. I had searched for "nose aluminum" and didn't come up with much.
 

·
Senior Member
Joined
·
4,342 Posts
I googled nose aluminum...
here's what I got.

 
1 - 4 of 4 Posts
Top