Factory Five Racing Forum banner

1 - 20 of 27 Posts

·
Premium Member
Joined
·
11,080 Posts
Discussion Starter #1 (Edited)
Well, I'm doing a bit of "restructuring" I guess here. I've reviewed my cost on all of my parts since I've found a new place to cut most of my custom aluminum parts. I also have someone here to package all these parts up for shipping now, so I don't have to deal with it myself. Due to these changes, I've gone thru and adjusted the prices on most of my products. Listed below are the new prices. I've also included some links below that so you can see the details of some of these products. Any prices listed in those linked threads are no longer valid....go by this list:

Diffuser Louvers - $150.00
Rev. 2 (smaller) Diffuser Louvers (Pair) - $70
Hood Louvers - $110
Rear Hatch Louvers (Pair)- $70
Side Scoop Louvers - $126
AC Plenum (Blower Motor Relocation Kit) - $45
Suspension Cam Bolt Washers - $36
Front Grille - $78
Kooks Custom GTM Exhaust System - $1893 + Shipping
Kooks Custom GTM Exhaust System LS7-$2031 + Shipping
Kooks LS7 Headers only-$1268.00 + Shipping
Kooks Headers only-$1130 + Shipping
Wing Window NACA Ducts - $318 per side in Fiberglass
$480 per side in CF
Custom Gel-Coat Rear Wing - $1200
Rear Hatch Replacement Carbon Fiber-$3000.00
Rear Hatch Replacement Fiber Glass-$2500.00
Intake Plenum for Rear Hatch Replacement-call for price
Mike DeGuire's Engine Cover - $349 fg 7 $439 CF
Universal Wing Mount System for VRSW Custom GTM Wing Or Custom ordered APR GTC300 Wing - $649
Quick-Release Pins for Universal Wing Mount - $140
Billet Alum Shifter Knobs for Brandwood Cable Shifter - $42
Stereo Close-out Panel (to seal tunnel from cockpit) - $36
ISIS 3-cell GTM Mounting Kit - $30
ISIS Universal Mounting Plate - $9
ISIS GTM Mastercell Mount - $12
Dead Pedal - $47
"Crate Engine" ECU "Adapter Plate" - $10
G50-to-Kooks Mounting Bracket - $10
Fog Light Mounting Brackets - $27
Vertical Crate Engine ECU Bracket - $23
Canton Coolant Tank Mounting Bracket - $18
Custom Storage Bin Kit - $129
Custom GTM Rear Body Vents (Pair) - $320
Custom Center Console Trim Plate - $30 - $45

More Gen II products listed below--------------

These prices do not include shipping. If you are familiar with what some of these prices were before, you can see that some of these parts have been reduced in price pretty dramatically! If you'd like to place an order, please visit my website (prices there are not updated yet---http://www.vraptorspeedworks.com ) Click on Contact and send me an email. Then we can get back to you with an order total with shipping and proceed from there. Thanks everyone!

New Gen II Products (some also fit Gen I):

Gen II Hood Louvers:
http://www.ffcars.com/forums/42-factory-five-gtm-forum/278734-gen-ii-hood-louvers-now-available.html

Diffuser Grille (Gap Filler):
http://www.ffcars.com/forums/42-factory-five-gtm-forum/275488-gen-ii-diffuser-grille-gap-filler-ffr-spacer-replacement.html
Also includes some front grille and exhaust trim panels in this thread.

Front Grille:
http://www.ffcars.com/forums/42-factory-five-gtm-forum/273386-how-about-gen-ii-front-grille-version-2-0-a.html

Hood Latch Striker Rub Plates:
http://www.ffcars.com/forums/42-factory-five-gtm-forum/273419-hood-latch-striker-rub-plates-paint-savers.html

Rear Body Louvers:
http://www.ffcars.com/forums/42-factory-five-gtm-forum/273418-gen-ii-rear-body-louvers-now-available.html

Aluminum Side Skirts & Front Splitter:
http://www.ffcars.com/forums/42-factory-five-gtm-forum/273022-lower-priced-options-front-splitter-side-skirts.html

Hatch Louvers:
http://www.ffcars.com/forums/42-factory-five-gtm-forum/273137-final-version-gen-ii-rear-hatch-louvers-now-available.html


End Of New Gen II Parts ----------------------------------------------------------------------------------------------------

Custom Center Console Trim Plate:
http://www.ffcars.com/forums/42-factory-five-gtm-forum/286542-custom-center-console-trim-plate.html#post2617518

Custom Rear Body Vents:
http://www.ffcars.com/forums/42-factory-five-gtm-forum/281521-gtm-248-update-its-been-while.html

Custom Storage Bin Kit:
http://www.ffcars.com/forums/42-factory-five-gtm-forum/284709-custom-storage-bin-kit-gtm.html

Canton Coolant Tank Mounting Bracket:
http://www.ffcars.com/forums/42-factory-five-gtm-forum/284662-canton-coolant-tank-mount.html#post2598703

Vertical Crate Engine ECU Mounting Bracket:
http://www.ffcars.com/forums/42-factory-five-gtm-forum/279934-just-one-more-gtm-product-vertical-crate-ecu-mount.html#post2553516

Fog Light Mounting Brackets:
http://www.ffcars.com/forums/42-factory-five-gtm-forum/278819-fog-light-mounting-plates.html#post2542851


G50-to-Kooks Mounting Bracket
http://www.ffcars.com/forums/42-factory-five-gtm-forum/278033-g50-kooks-bracket-mount.html


ECU Mount "Adapter Plate"
http://www.ffcars.com/forums/42-factory-five-gtm-forum/277872-computer-mount-bracket.html

Dead Pedal:
http://www.ffcars.com/forums/42-factory-five-gtm-forum/277257-gtm-dead-pedal-now-available.html


Custom Rear Window/Hatch Replacement:
http://www.ffcars.com/forums/showth...53#post1875653

And Intake Plenum for the Above Hatch:
http://www.ffcars.com/forums/showth...53#post1875653
Call for price.

Custom Built Rear Wing Designed Exclusively for the GTM:
http://www.ffcars.com/forums/showth...29#post2081229


Universal Wing Mount System Designed Specifically for my custom GTM Wing and also the APR CF wing:
http://www.ffcars.com/forums/showthread.php?t=229615

Track-Ready Coil-Overs:
http://www.ffcars.com/forums/showth...hlight=wilbers

Custom Front Grille for GTM:
http://www.ffcars.com/forums/showthread.php?t=199442

Link to Louver Pics:
http://www.ffcars.com/forums/showthread.php?t=192225
http://www.ffcars.com/forums/showthread.php?t=195646

New Rev. 2 Diffuser Lovuers:
http://www.ffcars.com/forums/showthread.php?t=240980

Wiper Motor/Washer Tank:
http://www.ffcars.com/forums/showthread.php?t=242616&highlight=washer+tank

AC Relocation:
http://www.ffcars.com/forums/showth...ight=ac+plenum

Cam Bolt washers
http://www.ffcars.com/forums/showth...light=cam+bolt
http://www.ffcars.com/forums/showth...light=cam+bolt

Billet Shift Knobs to fit all Brandwood Cable Shifters:
http://www.ffcars.com/forums/showthread.php?p=2256044#post2256044

Stereo Close-Out Panel:
http://www.ffcars.com/forums/showthread.php?t=249191

ISIS Mastercell and Powercell Mounting Kit:
http://www.ffcars.com/forums/showthread.php?p=2296124#post2296124


All above louvers are made from .080" alum.

I am also taking orders for the complete Kooks exhaust system for the GTMs:

http://www.ffcars.com/forums/showthread.php?t=238432

And don't forget, I still build custom GTM's built to customer specs!

Thanks!
 

·
Premium Member
Joined
·
979 Posts
If you are on the fence about ordering any of Shane's products, I have several of them and they are all top notch.

Mike
 

·
Premium Member
Joined
·
11,080 Posts
Discussion Starter #5
Just thought I'd add some pics of the NACA duct "wing window" replacement panels, since I don't have a link to those in the first post:



 

·
Premium Member
Joined
·
11,080 Posts
Discussion Starter #6
Bump...new products added to list in first post......and hopefully spark some interest in that Kooks run!! Thanks everyone!
 

·
Premium Member
Joined
·
11,080 Posts
Discussion Starter #8
The engine cover.......I've already made the mold and pulled a part from it. I still need to figure out how to mount this thing to the engine. Normally, I planned on having it fit and "clip" onto the fuel rail, the way the factory coil covers do. Main problem with that plan is that the engine I've got in the shop right now has some aftermarket billet fuel rails on it, so I can't really use that engine as a pattern for where to place the clips. I'll get back on it as soon as I can.
 

·
Junior Charter Member
Joined
·
160 Posts
Front Grille

Shane, if the front grill is the same finish as the other louvers that you have sent me, I will take it. Thanks, Brian
 

·
Registered
Joined
·
420 Posts
Bump for customer inquiry.
Hi Shane,

An inquiring customer would like to know. . . what's the lead time on a Kooks exhaust system. From what I recall, you batch the orders for these together before Kooks mfgs them.

Cheers,

Ruth
 

·
Premium Member
Joined
·
11,080 Posts
Discussion Starter #12
That's a great question, Ruth! I have the Kooks systems made in batches of 10....so I need 10 orders before I can turn in my batch order to Kooks. If you've seen the latest Kooks order thread:

http://www.ffcars.com/forums/showthread.php?t=238432

you'll see that I started that thread in January, and I'm still sitting at 5 confirmed orders.....so I still need 5 more to proceed. I do not collect $$$ until I'm ready to turn the order in to Kooks, so if you're wanting to get on that list, I just need for you to follow the instrucions in post #1 of that thread and shoot me a PM with that info. Once I have 10 confirmed orders, I will contact you to collect payment so I can turn in the order to Kooks. Once orders are turned it, it seems to be about 6 weeks until Kooks ships the completed systems.

There doesn't seem to be much of a pattern to how long it takes to fill these 10 slots. Some runs have taken over 6 months (like this one), some have taken just 2 or 3 months to get 10 orders. As others besides me have said, it is seriously probably the best "bang for the buck" you'll spend on your GTM. A full, complete ALL STAINLESS, long-tube header/X-pipe system.... for the $$$$.....you just can't hardly beat it! Thanks for the inquiry, and please let me know if you have any other questions.
 

·
Senior Charter Member
Joined
·
2,181 Posts
I would like to see a pic of the AC relocate on a finished car. It looks to me that the blower is in the pass side footbox. If so I would like to see it mounted before I decide to spend the money. I like the idea of drawing in air from the cabin instead of outside but I don't want to look at the blower motor either. I could be way off here. Thanks Kris
 

·
Premium Member
Joined
·
11,080 Posts
Discussion Starter #14
This thread shows the motor mounted in the footbox.

http://www.ffcars.com/forums/showthread.php?t=186545&highlight=ac+plenum

I'd have to dig around to see if I have a photo of it installed in a finished car. I wrapped the outside radius of the motor in the same carpet as the rest of the floor, so it doesn't really stick out visually. Once you get your dash in place you can see that where it's mounted isn't all that visible.
 

·
Senior Charter Member
Joined
·
2,181 Posts
Thats the pic that I saw that made me wondor. If you do get a chance in the next few days would you mind posting a pic on it on a finished car. I'll dig around and see if I can find anything also. To those that have done this mod does it save you alot of time also? I've read about the dreaded plastic piece over the AC unit.
Thanks alot, Kris
 

·
Registered
Joined
·
1,379 Posts
Most Current Prices

Well, I'm doing a bit of "restructuring" I guess here. I've reviewed my cost on all of my parts since I've found a new place to cut most of my custom aluminum parts. I also have someone here to package all these parts up for shipping now, so I don't have to deal with it myself. Due to these changes, I've gone thru and adjusted the prices on most of my products. Listed below are the new prices. I've also included some links below that so you can see the details of some of these products. Any prices listed in those linked threads are no longer valid....go by this list:

Diffuser Louvers - $150.00
Rev. 2 (smaller) Diffuser Louvers (Pair) - $126
Hood Louvers - $195
Rear Hatch Louvers (Pair)- $135
Side Scoop Louvers - $126
AC Plenum (Blower Motor Relocation Kit) - $45
Suspension Cam Bolt Washers - $36
Front Grille - $78
Kooks Custom GTM Exhaust System - $1788 + Shipping
Kooks Custom GTM Exhaust System LS7-$1913 + Shipping
Kooks LS7 Headers only-$1184.00 + Shipping
Kooks Headers only-$1059.45 + Shipping
Wing Window NACA Ducts - $318 per side in Fiberglass
$480 per side in CF
Custom Gel-Coat Rear Wing - $1200
Rear Hatch Replacement Carbon Fiber-$3000.00
Rear Hatch Replacement Fiber Glass-$2500.00
Intake Plenum for Rear Hatch Replacement-call for price
Mike DeGuire's Engine Cover - coming soon
Custom Aluminum Fuel Tanks-$1175
Universal Wing Mount System for VRSW Custom GTM Wing Or Custom ordered APR GTC300 Wing - $649
Quick-Release Pins for Universal Wing Mount - $140
Wiper Motor Mount/Washer Tank - Coming soon
Billet Alum Shifter Knobs for Brandwood Cable Shifter - $42
Stereo Close-out Panel (to seal tunnel from cockpit) - $36
ISIS 3-cell GTM Mounting Kit - $45

These prices do not include shipping. If you are familiar with what some of these prices were before, you can see that some of these parts have been reduced in price pretty dramatically! If you'd like to place an order, please visit my website (prices there are not updated yet---http://www.vraptorspeedworks.com ) Click on Contact and send me an email. Then we can get back to you with an order total with shipping and proceed from there. Thanks everyone!


Custom Aluminum Fuel Tanks:
http://www.ffcars.com/forums/showthread.php?t=246014

Custom Rear Window/Hatch Replacement:
http://www.ffcars.com/forums/showth...53#post1875653

And Intake Plenum for the Above Hatch:
http://www.ffcars.com/forums/showth...53#post1875653
Call for price.

Custom Built Rear Wing Designed Exclusively for the GTM:
http://www.ffcars.com/forums/showth...29#post2081229


Universal Wing Mount System Designed Specifically for my custom GTM Wing and also the APR CF wing:
http://www.ffcars.com/forums/showthread.php?t=229615

Track-Ready Coil-Overs:
http://www.ffcars.com/forums/showth...hlight=wilbers

Custom Front Grille for GTM:
http://www.ffcars.com/forums/showthread.php?t=199442

Link to Louver Pics:
http://www.ffcars.com/forums/showthread.php?t=192225
http://www.ffcars.com/forums/showthread.php?t=195646

New Rev. 2 Diffuser Lovuers:
http://www.ffcars.com/forums/showthread.php?t=240980

Wiper Motor/Washer Tank:
http://www.ffcars.com/forums/showthread.php?t=242616&highlight=washer+tank

AC Relocation:
http://www.ffcars.com/forums/showth...ight=ac+plenum

Cam Bolt washers
http://www.ffcars.com/forums/showth...light=cam+bolt
http://www.ffcars.com/forums/showth...light=cam+bolt

Billet Shift Knobs to fit all Brandwood Cable Shifters:
http://www.ffcars.com/forums/showthread.php?p=2256044#post2256044

Stereo Close-Out Panel:
http://www.ffcars.com/forums/showthread.php?t=249191

ISIS Mastercell and Powercell Mounting Kit:
http://www.ffcars.com/forums/showthread.php?p=2296124#post2296124


All above louvers are made from .080" alum.

I am also taking orders for the complete Kooks exhaust system for the GTMs:

http://www.ffcars.com/forums/showthread.php?t=238432

And don't forget, I still build custom GTM's built to customer specs!

Thanks!
Shane,
Are these still your current prices? I'm about to send you an email for my next order and see a few different prices on your web site. Thanks.

R/s
:eek:fficer3: Vidal
 

·
Premium Member
Joined
·
11,080 Posts
Discussion Starter #19
Yes, these are the current prices. I've been a bit busy lately with trying to work on 2 GTM's and build an addition onto my shop by myself (in all of my spare time), so I have not taken the time to update my website. Sorry for the confusion.
 
1 - 20 of 27 Posts
Top