Factory Five Racing Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
1,311 Posts
Provided the 4" tubes and x-members are square, I suspect you don't have anything to worry about. I'd measure those, and worry a lot less about the 3/4" framing. One thing I can tell you for sure is that the upper 3/4" cross member that the radiator mounts to is NOT square; it is almost always skewed both top to bottom and side to side. Also, when it comes time to fitting the body, you're almost certain to find that one or both of the front outriggers need to be "massaged" into place, sometimes by as much as an inch.


John
 
1 - 1 of 1 Posts
Top