Factory Five Racing Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

· FFCobra Craftsman
Joined
·
1,333 Posts
Heads-up on the 4 and 6-piston Wilwood setups if you use PSE wheels - these wheels (regardless of offset) will NOT fit without the use of spacers and longer wheel studs.

The 4-piston Dynalite calipers need 1/2" or 5/8" spacers; the 6-piston Superlite calipers need 3/4" spacers. I got a set from Gordon Levy.

Again FYI - if you plan to race the car, be aware some sanctioning bodies will not allow spacers, unless they are pinned or bolted to the wheel hub or wheel.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top