Factory Five Racing Forum banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
9,692 Posts
Discussion Starter · #1 ·
I may be going to the pull a part yard this weekend. What do I need to take at a minimum to pull the axles out of either a Ranger or Aerostar? I just don't want to get down there and need that one thing I forgot.
 

·
Junior Charter Member
Joined
·
1,637 Posts
Tim

1) Big lug wrench
2) Big Screw driver
3) Brake adjusting spoon
4) Metric & SAE Sockets & Wrench
5) Long nose plyers
6) Stick Magnet
7) 5/16-6 point socket 1/4 drive, and breaker bar to remove spider gear pin.
8) Rubber Gloves
9) Plastic Bags
10) Rags
11) 5 Gal Sheetrock bucket
12) Hand Truck With Pneumatic Tires
13) Bunjie cord to hold 5 gal bucket to hand truck.
14) 8x10 blue tarp.
15) coffee, danish
16) Flash Light
17) Cash

Tim
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top