Factory Five Racing Forum banner
1 - 7 of 7 Posts

· Senior Charter Member
Joined
·
332 Posts
Discussion Starter · #1 ·
What is the largest tire that will fit with a IRS...I know that a 275/40R17 will fit would a 315 R17 fit...I know that this tire will fit on a solid axle car with some frame modifications...thanks for the info...later....
 

· Senior Charter Member
Joined
·
332 Posts
Discussion Starter · #4 ·
The tires on the car look angled...It looks like you and even run a sway bar and quad shocks...thanks for the link and the reply....
 

· Senior Member
Joined
·
1,033 Posts
Our car is autocrossed a lot so the tires are running a bit of camber :D Our car started out as a live axel with a narrowed rear end....then was retrofit with IRS and then clearanced for 315's. We do run adjustable sway bars and shocks. The car handles like it is on rails!


For pics of 315's on a straight IRS build see Jeff build page on our site.

http://www.norcal-cobras.com/fick/journal2.htm
 

· Senior Charter Member
Joined
·
332 Posts
Discussion Starter · #6 ·
Thanks for the reply...is Jeff using sway bars and quad shocks...do the tires rub...thanks again...later....
 

· Senior Member
Joined
·
1,033 Posts
He is using quad shocks. No tire rub.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top