Factory Five Racing Forum banner

Is the distribution block needed

424 Views 13 Replies 11 Participants Last post by  Cobra54
I am running discs in the front and drums in the rear.Do I need to use the distribution block? I know folks who are running four wheel discs without it.Thanks. Chris Meyer
Boynton Beach.
1 - 1 of 14 Posts
So, is the prop valve a safety device?

I also thought not. I thought it was just a proportioning valve for bias. I'm running four wheel discs( stock '95 up front and '98 gt in the rear, and the car brakes fantasticly with no bias problems. I plumbed from the mustang mc straight to the rubber lines. The reason I did this was because I noticed everyone running their prop valves wide open or gutted distribution blocks.

Get your fuel lines run yet chris? Maybe come down your way on sat.

chris bailey
See less See more
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.