Factory Five Racing Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
100 Posts
Discussion Starter · #1 ·
FFR sent me six shocks for my MKIII and four spring sets. The springs sets are all the same, but two of the shocks are about 1" or so longer than the other four.

Which shocks should I use? On the longer shocks the spring will not reach the lock nut unless the adjustment for the spring is all the way to the top thread. If I should use the longer shock, would it go on the front or rear?

I think the longer shocks are for the 3 link but I am running the IRS. I just want to make sure.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top