Factory Five Racing Forum banner
1 - 2 of 2 Posts

·
Junior Charter Member
Joined
·
75 Posts
Discussion Starter · #1 ·
Is anybody having a problem with interference of the bolt head and or the nut and the lower control arm shcok mounting.These are the FF supplied Arms.
 

·
Registered
Joined
·
464 Posts
Yes! On one arm, I can not get a socket on the bolt head or nut. Only able to turn with an open end wrench. Other side is ok. Have yet to decide if anything will need to be done about it. I am almost convinced I have it tight enough with two open end wrenches.

FYI, problem arm is the left lower, pin drive, IRS.
 
1 - 2 of 2 Posts
Top