Factory Five Racing Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
854 Posts
Discussion Starter · #1 ·
Just received my Over riders / nudge bars/ sleeves from Finishline.

There were no instructions in the box, and have failed to locate any using the forum search.

the sleeves are 11 in front, 7 rear.
The fronts fit nicely in the grommets, yet look way too long.

I hate to assume ( yet I will ) that I need to drill the rear body to use the new sleeves - as the FFR supplied ones are 2 piece..

I am aware of the angle issue on the front.

Looking for info to secure nudge bar to over riders, and correct length for sleeves - bolt length both front and rear, and hardware for the hoop.

Thanks for the help -

Have a safe & wonderful holiday season.
"E"
 

· Super Moderator
Joined
·
29,393 Posts
Give Paula at Finish Line a call
 

· Registered
Joined
·
854 Posts
Discussion Starter · #3 ·
I did that first, no reply yet... figured she was busy.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top