Factory Five Racing Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
FFCobra Fanatic
Joined
·
3,884 Posts
Discussion Starter #1
Car starts fine but does not idle have to keep giving gas.

During the gocart ride reverse works fine but first the car bucks. The clutch is new with aluminum quadrant nonadjustable. Thoughts-Bill ;)
 

·
FFCobra Fanatic
Joined
·
3,884 Posts
Discussion Starter #2
Okay I fixed the idle, adj idle screw in and adj timing. Now the clutch still sticks? Any sugestions?
 

·
Out-of-control teenager
Joined
·
835 Posts
If adjustability is what you are after, I believe finishline sells a blue anodized aluminum threaded adjuster for the clutch cable. But someone else will have to answer your question. :confused:
 

·
Registered
Joined
·
294 Posts
Make sure the throw out bearing is under slight pressure riding the fingers of the pressure plate-if not the plate may not release far enough to free the clutch. This is adjusted under the car.

Dave :D
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top