Factory Five Racing Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
657 Posts
Discussion Starter #1
Should I be using any thread sealer paste or teflon tape around heater connections such as the elbow joints coming off the heater core? Will likely use thread sealer at the manifold junction.
 

·
Registered
Joined
·
178 Posts
On my FFR supplied heater, it was a flared joint between the heater core and the right angle adaptors. Therefore the threads aren't a sealing surface and as such, no sealant required.

Cheers, Nigel in South Oz
 
1 - 2 of 2 Posts
Top