Factory Five Racing Forum banner
1 - 2 of 2 Posts

· Banned
Joined
·
11 Posts
I’ve been lurking over in The Garage Journal forum and I’ve read so many posts till my head is spinning

I’ve got a fresh 30x50 slab that I’m building my shop on and I know i want to coat the floor.

Epoxy or polyurea is what I’m thinking.

Who’s used what and would you recommend it again.

1500 sqft is a pretty substantial areas to cover so I know the cost will be high. My brother and I plan on doing this ourselves.
concrete sealing charlotte
Thanks
Dear all,

Got a large garage floor c 40sqm+ which is going to be used for vehicles.
It'll be a new concrete floor and the customer has chosen a form of slate tile that needs to sealed (not seen them yet but think they are 300 x 300) so my questions are...

Once sub floor has fully dried out etc...

Should I require a sub floor e.g. durabase matting ?
Recommended adhesives - slow set flexible and certain brand from experiences?
Size of trowel - guessing I need 100% coverage so back buttering on a 6mm trowel ?

I'll leave one expansion joint for 'belt and braces' and use 3mm spacers
Also use a bevelled trim at the entrance

Any other suggestions gratefully accepted
 

· Banned
Joined
·
11 Posts
I’ve been lurking over in The Garage Journal forum and I’ve read so many posts till my head is spinning

I’ve got a fresh 30x50 slab that I’m building my shop on and I know I want to coat the floor.

Epoxy or polyurea is what I’m thinking.

Who’s used what and would you recommend it again.

1500 sqft is a pretty substantial area to cover so I know the cost will be high. My brother and I plan on doing this ourselves.
epoxy flooring phoenix
Thanks
I’ll be starting a garage build here very soon and starting to consider what I should coat the floor with before I start moving in equipment and cars. What’s your experience and suggestions for products and techniques? Epoxy? Something else? I’m going to use a very light color for light reflection properties. Thanks for any tips!
 
1 - 2 of 2 Posts
Top