[choice40]

I am using FFR lower arms, sn95 spindles, I have mounted my shock upside down with the 5/8 DOM tube spacer on it. The top arm hits my coil-overs the only thing my caster, camber, & toe is not set
any suggestions
Thanks
Tom

 

[Ozona]

Ya, twist the upper adjusting tubes a few turns a side.. You'll find that it moves the upper a arm away from the coil over - fast.

 

[Tim Cronin]

adjust them out with about 3/4" threads showing. Make sure the longer spacer is to the front
TEC

 

[FFR-3570]

The picture in the manual is wrong too. The upper spacers are backwards.. looking from the side you need the thicker/longer one twards the front of the car..

Rich