Factory Five Racing Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
6,414 Posts
You can make your own TDC tool out of an old spark
plug...break out the ceramic and tip, and drill and tap the center for a 5/16 thread...then use a long bolt through the tapped hole, with a locking nut at the top...Screw the former spark plug into #1 , get it near top and screw in the bolt (very carefully)...hand rotating until the bolt just barely makes contact..go back and forth until it barely touches in both directions. Voila...TDC!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top