Factory Five Racing Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
217 Posts
Discussion Starter · #1 ·
How far down onto the upper shaft should the hub be. The mustang steering wheel sat flush with the upper shaft.I would have to force the FFR hub to get it on that far. Thanks Greg
 

·
Moderator
Joined
·
4,016 Posts
Greg,

My FFR hub was flush with the upper shaft also. Tightening it down with the bolt in the center (with a washer) was fairly easy to get it flush but you will need a wheel puller to remove.

Henry
 
1 - 2 of 2 Posts
Top