Factory Five Racing Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,340 Posts
Note that some transmission rebuilders don't install a thin film of RTV around the seal before installing it in the transmission. Mine had a leak that looked like the yoke but in fact was simply trans fluid slipping between the metal edge of the seal and the edge of the transmission. I was able to pry the seal back enough to spread a light film of RTV around the edge before tapping it back into place (with the driveshaft still installed :)) and eliminated the leak.

HTH
Todd
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top