Factory Five Racing Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
618 Posts
Discussion Starter #1
Looking for a recommendation on a distributer for a FE. Want to try and maintain as close to a period correct look as possible. Using hydraulic roller cam and carb setup. Thanks for any feedback you can provide.

Joey
 

·
Choosing what to buy
Joined
·
31 Posts
I have the same set-up as you. I went MSD with external Control Box (Hidden behind the dash). I also bought the Black cap and black wires for a vintage look.
361768
 

·
Choosing what to buy
Joined
·
31 Posts
I am told by multiple FE Engine builders that the MSD with built-in control circuit is NOT A GOOD OPTION.
 

·
new member
Joined
·
290 Posts
if you want the original look get a stock dissy and do a petronix conversion to it it looks stock but has electronic ignition , i used one in a 67 GTO dad and i are rebuilding,i like the look of the stock unit, too much modern stuff looks out of place on classic or vintage cars but thats just my 2 cents ,
 

·
Registered
Joined
·
20 Posts
Looking for a recommendation on a distributer for a FE. Want to try and maintain as close to a period correct look as possible. Using hydraulic roller cam and carb setup. Thanks for any feedback you can provide.

Joey
Mallory Unilite, but be sure to use a ballast resistor.
361806

Looking for a recommendation on a distributer for a FE. Want to try and maintain as close to a period correct look as possible. Using hydraulic roller cam and carb setup. Thanks for any feedback you can provide.

Joey
 
1 - 5 of 5 Posts
Top