Factory Five Racing Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
9,698 Posts
Assuming you are carbed, if you already have it wired to the distributor and the coil, you will only need to connect the large red wire to a constant voltage source. I'm also using the AAW harness, and connected the small red MSD wire to the AAW wire from the ignition key that is supposed to go to the coil. (can't remember the color). MSD shows the large red wire connected to the solenoid, that will also work in your application. If you are EFI, buy the MSD connector that will connect the MSD box to the distributor. John
 
1 - 1 of 1 Posts
Top