[HoustonCobra]

My plan is to put a coyote motor i would love to have power brakes. I would like ps too but don’t care about power steering as much. Will Whitbys kit fit? I plan on using the sn95 pedal with the coyote accelerator. If any other or better options please let me know I plan on running Svt cobra rotors and brakes all around. I’ve looked at hydro boost too not sure what will work best.

 

[Michael Everson]

I do this all the time. You can source most of the parts at any parts store. Here is a list from Oreilly auto parts
87-93 Mustang booster 54-73207
Master cylinder 95 Mustang GT 10-2693
fitting BLF33B
fitting BLF31B
This booster will bolt to the mustang pedal box with some minor hole changes. Its a direct bolt to the 87-93 box.
You will also need a booster spacer from www.replicaparts.com
One minor frame mod will also need to be done and you will be all set.
I have put power brakes in many FFRs and everyone loves them.
Mike

 

[HoustonCobra]

I do this all the time. You can source most of the parts at any parts store. Here is a list from Oreilly auto parts
87-93 Mustang booster 54-73207
Master cylinder 95 Mustang GT 10-2693
fitting BLF33B
fitting BLF31B
This booster will bolt to the mustang pedal box with some minor hole changes. Its a direct bolt to the 87-93 box.
You will also need a booster spacer from www.replicaparts.com
One minor frame mod will also need to be done and you will be all set.
I have put power brakes in many FFRs and everyone loves them.
Mike

Mike thank you very much. This is way more than what I was expecting. Do you know if this will cause any issues space wise with the coyote?

 

[Michael Everson]

None at all

 

[HoustonCobra]

None at all

Ordering it all tomorrow after my amex bill is cleared out haha time to load her back up.

 

[HoustonCobra]

I do this all the time. You can source most of the parts at any parts store. Here is a list from Oreilly auto parts
87-93 Mustang booster 54-73207
Master cylinder 95 Mustang GT 10-2693
fitting BLF33B
fitting BLF31B
This booster will bolt to the mustang pedal box with some minor hole changes. Its a direct bolt to the 87-93 box.
You will also need a booster spacer from www.replicaparts.com
One minor frame mod will also need to be done and you will be all set.
I have put power brakes in many FFRs and everyone loves them.
Mike

Is there a large difference between fox body pedal box and sn95 I don’t care about looks. Just want to make sure I can stop the dang thing. Obviously the throttle doesn’t matter as it’s drive by for the coyote.

 

[Gordon Levy]

Not a fan or power brakes in these cars, I find them to be a bit uncontrollable in extreme situations. proper braking systems are far better.

 

[HoustonCobra]

Not a fan or power brakes in these cars, I find them to be a bit uncontrollable in extreme situations. proper braking systems are far better.

My concern is my wife driving this. I didn’t have power brakes in my Datsun and she didn’t like to drive it….. second thought sounds like a good idea haha. When you say proper braking system. Are you referring to rotors pads and caliber set up? I for sure will be giving you a call tomorrow.