Factory Five Racing Forum banner
1 - 1 of 1 Posts

· master craftsman
Joined
·
5,596 Posts
Blow in only the spots and go forward. If your going black you can use either b c/cc or single stage, your going to cut and buff either way. If you can put down laquer over your primer, you could go old school and put down 12 or 13 coats, cut and buff and end up with that mile deep black. Advance auto sells pre mixed laquer in quarts, just open and spray. check and see if your primer will accept a laquer topcoat.....nothing sprays down easier than laquer.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top