Factory Five Racing Forum banner

Broken Sun Visor - Part 2

336 Views 4 Replies 3 Participants Last post by  chmasy
Here is Part 1

I ordered the Polycarbonate from McMaster Carr, and I think it turned out pretty good. I thought the original weren't wide enough, so I took the opportunity to customize things.

They are not as dark as the originals - but thats OK, I mainly use them as wind deflectors. I guess I could always add some tinting from Pep Boys. For now, the edge is just lightly sanded - I am going to look into the chemical treatment when I get a chance. They sure a lot 'beefier' and the price was right ($15 vs $40)
See less See more
1 - 2 of 5 Posts
If you have a scrape peice, sand the edge and use a propane torch on the edge. it should smooth it out
Try wet sanded with very fine grit paper and then use toothpaste to buff to a glass like finish
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.