Factory Five Racing Forum banner
1 - 2 of 2 Posts

·
Charter Member
Joined
·
2,035 Posts
Sherrell, same engine had same issue. I talked to Mike and he has a plate that mounts between the oil filter and block with a bung in it for the oil temp sensor. I am waiting for my first oil change to install it. HTH.
 

·
Charter Member
Joined
·
2,035 Posts
Sherrell,

I have the FFR 4x4 headers so my filter is in the stock location. I don't see an issue with clearance. The plate seems like it will add about 1 1/2" between the block and filter when installed. Might bring it a bit closer to the header if anything. The stock filter is the tall one and I have seen guys run a shorter filter but I'm really not seeing an issue anyway. I'll be at work until about midday on Sun and could snap a pic of my current setup (without) an/or the plate uninstalled if it would help you.
 
1 - 2 of 2 Posts
Top