[Intake Gasket]

Can I use the same bolts that hold the flexplate to the crank to attach the flywheel to the crank? Also, any suggestions for getting those bolts loose so I can take the flexplate off? Thanks, guys.

 

[Turbopit]

I think they are a different length. Shouldn't be a big deal getting the right bolts. ARP has them if you can't find stock type.

Impact gun is the easiest way, Otherwise, breaker bar.

 

[Kobra4Kris]

I asked this same question a while back....


Topic: Flexplate vs Flywheel bolts??? Interchangeable??

If you have a 1 inch long threaded section on the bolts, they should be long enough.

HTH
Kris

 

[Intake Gasket]

Thank you, gentlemen. That threads a huge help, thanks Kris.