Factory Five Racing Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
4,498 Posts
mark you will find the hoses may not be long enough too

well they were not for my wilwoods

go to SCP and change out the fittings at the bottom and install 4AN i believe that was the size i used, i then got some stainless fluid hoses make sure they work with brake fluid should be a 1/8 or 1/4" npt fitting at the bottom of the reseviors
good luck, buzz by the house i will show you my set-up
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top