[Shoeless]

Hi,
I have made my own low mount front air lift system to use with factory shocks and tried it on one side yesterday. It took about 22sec to lift the front up around 2” and I wish to decrease the lift time as much as possible. What compressor do you guys use to have the lift time as low as possible?

Thank you
/Johan

My Stance Air Cup kit came with a Viair compressor and takes probably 5-6 seconds to fully extend(lift) the front end.

 

[Shoeless]

I was hoping to solve the issue without a reservoir due to the lack of space. But if a bigger compressor wont help I have no other choise.

Thank you
/Johan

You do not need a tank, at least with the Tankless Front Kit from Stance Parts you don't.

Here is a link to the Tankless setup with a Viair 400c Compressor Setup. With the Tankless kit there is a pressure switch on the compressor output line that once the system is pressurized (car lifted) it shuts the compressor off.

TANKLESS FRONT KIT – Stanceparts

Air cup systems

www.stanceparts.com