Factory Five Racing Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
644 Posts
Discussion Starter · #1 ·
The funny looking curved and twisted dipstick that comes with the FMS 302 crate motor won't sneak down between the 4 into 1 FFR headers and the footbox. Can anyone suggest a part number and or pictures of a dipstick that will work with the FMS 302 motor and the FFR 4 into 1's? Will just a straight dipstick sneak in there? Ford racing sells a knurled straight stick.
 

·
1st RFM/FFR Legacy Winner
Joined
·
25,974 Posts
Matt,
I faced the same problem and I'm cheap so I made a DIY tube out of the 3/8 metal fuel line that came with the kit. I cut the measurement stick down appropriately to make the reading accurate.





Greg
 

·
Junior Charter Member
Joined
·
746 Posts
I used the braided Lokar dip stick.

Troy
 

·
Charter Member
Joined
·
1,770 Posts
I will be installing the braided Lokar tomorrow.
 

·
Premium Member
Joined
·
7,018 Posts
I am using the Lokar dipstick, Jimmy (Sorry could not resist :lol:), but it reads one quart off!
 

·
Tool Collector
Joined
·
6,608 Posts
Matt, The one you have will work. It just needs a little "messaging".
 

·
Premium Member
Joined
·
9,698 Posts
Get a tube for a '92 Mustang 5.0 from your local Ford dealer. or Max at 5 star Ford.
 
1 - 10 of 10 Posts
Top