Factory Five Racing Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. Parts For Sale / Wanted
    I've got a 15:1 manual steering rack NIB & manual steering rack adapter for sale. #14688 - MANUAL STEERING RACK no longer available from FFR. Retails for $289.00 #14555 - MANUAL STEERING RACK ADAPTER available from FFR for $75.00 TOTAL from FFR: $364.00 plus shipping YOU PAY $200.00 plus...
  2. Brake and Suspension Tech
    [/URL][/IMG] I have been building a kit car using a Mustang II front end for years now. Originally I had a power steering rack from a 1978 Mustang II. When I moved to New Zealand I started to investigate RHD options. Ford never made a RHD Mustang II Flaming River didn't make a RHD until...
  3. Factory Five Roadsters
    I'm weighing my options for steering. I'm planning on installing a Coyote motor with a t56 magnum and didn't want to be left with the antiquated manual steering. Early on I had thought I'd go with a flaming river power steering set up, but it seams to be way too expensive. After doing some...
  4. FFR Type 65 Coupe
    Anyone come across this problem on the current batch of Coupe parts? I called F5R and they confirm the nylok is correct, no longer using a castle nut and cotter pin for this connection. Driver side went together sort of smoothly, but I needed a lot of torque to crank the tie rod to the correct...
  5. Parts For Sale / Wanted
    FFR Stainless Side Exhaust - new price New, in-the-box, parts for sale: FFR#s 14928 (LH) & 14929 (RH) - Polished stainless 4 into 4 side exhausts - $825 plus shipping
  6. Ford Modular Engine Roadster Builds
    I have been looking at the procedure used in the very nice Mk3Build.com site to adjust the horizontal position of the steering rack. On the site he found his rack was offset to one side by around 0.3 inches. To compensate (and minimize bump steer) he used solid offset aluminum rack bushings to...
  7. Factory Five Roadsters
    Can anyone tell me what the size of the Front Steer Rack and Pinion 15.5" or 16"? I am putting in a Flaming River rack and pinion. Also anyone know the length of the steering column? Thanks
  8. Parts For Sale / Wanted
    Would anyone have a Steering Rack to fit a Fox body Mustang? This is my son's car (his money) that we rebuilt and the steering is a little loose. Thank you Stuart
  9. Pillow Block Relocation

    This is the pillow block relocation plate powder coated and bolted in place.
  10. Steering Pillow Block Offset Plate

    After moving the steering rack back using the Ackerman bushings the steering universal joints were binding so I had to relocate the lower pillow block slightly. This is the offset plate that I made from 3/16" steel plate.
  11. Ackerman Drilling

    This photo shows the drill jig in use. It bolts into the stock MkI / MkII rack location and has a bushing to locate a 1/2" drill bit for drilling the X member.
  12. Ackerman Mod Drill Jig

    This is a simple jig I made to allow the holes for the Ackerman mod to be drilled from the engine side so you don't have to remove the radiator to drill from the other side.
  13. Ackerman Mod, After

    This photo shows the steering rack relocated back against the X member using the Breeze bushings.
1-13 of 13 Results
Top