Factory Five Racing Forum banner


  1. Wrecked Roadster #8888 Rebuild Part 12

    Factory Five Roadsters
    Well we are back from a long needed vacation. Back to the daily grind, But also back to our awesome rebuild project!!! Here in part 12 we get the passenger foot box built and we get the rear end torn down only to find more broken parts. Oh well we knew things like this were going to happen. So...
  2. Wrecked Roadster Rebuild #8888 Part 9

    Factory Five Roadsters
    Alright guys here is the next video. Welded everything that was left to weld. 5-link is fully installed and we got the battery tray mocked up in the left rear fender well. Check it tells what ya think. love to here all comments.
  3. Rebuilding Wrecked Roadster #8888 Part 8

    Factory Five Roadsters
    Welcome back everyone for part 8 in the wrecked cobra rebuild! In this video we got the front end of the car fully welded and worked on the drop trunk...
  4. Wrecked Roadster Rebuild #8888 Part 7

    Factory Five Roadsters
    Hey Guys we have the all the bars reinstalled on the front on the car. We made some driver foot box changes. We moved the brake and clutch pedal assembly over to the left by 3/4 of an inch. We also replaced the whole front cross member. We tack installed the rear 5 link member and started the...
  5. Have a MK IV complete kit and Mk VIII IRS requesting advice

    Factory Five Roadsters
    I'm new to the site and receiving a complete MK IV kit in about 2 weeks. I found a deal on a MK VIII IRS and picked it up for $300. It was from an 1998 LSC so it has 3.27 gears which should be plenty since I'm planning a 408w build. Here's what I'm planning but I wanted a little free advice if...
  6. Question for anybody who has rebuilt a 4.6 DOHC

    Ford Modular Engine Roadster Builds
    I need to replace a leaking head gasket on my 1996 DOHC 32valve engine. The service manual says to lock the cams and crankshaft in place with special Ford tools and leave them on after timing chains are removed. On the re-installation the manual says you must rotate the crankshaft...
  7. 390 Rebuild Begins

    Ford Big Block Engines
    Hey Everybody, I'm getting ready to start a 390 rebuild! I wanted a big block and needed something 1967 or older to get a waiver for emissions testing so I bought this pile of parts from a guy on Craigslist. Things look to be in fairly good condition, but there is a bit of rust in a couple of...
  8. T-5 Overhaul

    Canadian Region by Specialty Car Parts Canada
    Does anybody know of a good place to have a T-5 rebuilt in the Calgary area? Thanks, Bill