intake manifold

The following parts are from a 95 Mustang 5.0 w/ 5 speed transmission. Great if you are considering converting to EFI. Parts Include: 8-19lb/hr fuel injectors, stock upper and lower intake manifolds, stock mass airflow meter, stock throttle body, and computer for standard transmission. All parts...

I'm installing a mass-flo system onto stock cylinder heads. The gaskets I got at the parts store have the egr valve cut-outs in them, Can I use these or am I just asking for a vacuum leak? With the mass flo intake manifold there is no egr. Thanks in advance. Eddie

Converting a 1991 5.0 from EFI to carb for FFR2774. It will retain the Twisted Wedge heads and Comp Cam (gross lift 0.532 int/0.544 ex, duration @ 0.050 is 224 int/229 ex). Running T5 with 355 gears in the rear end. Considering a 650 cfm carb (vacuum secondary). What would be a good intake...

Everything you see here came off of a '97 Mercury Mountaineer. I didn't use it - went the carburetor route. All pictured below for $150 (plus shipping) until noon on Saturday. (Then it goes on Ebay and I don't know the rules regarding taking it off if someone here wants it.)