Factory Five Racing Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Factory Five Roadsters
    Hello experts! I'm hoping someone might be able to point me to the next area to start investigating... I bought a MK1 2 years ago (fox body donor w/302 EFI) and at the time, turn signals and driver's side lo-beam were not working (lo-beam was only receiving 6 volts). No big deal as I didn't...
  2. New Member Introductions
    I have a MK1 built (not by me) in 1999... having electrical issues, which I will post in proper forum.
  3. Factory Five Roadsters
    Hey guys, I would appreciate any help if you offer. 1. Speed dial: The wire diagram on pg 66 has pin T-38 to speed sensor return with a red wire and from the speed sensor return to the speed dial with a green wire. Pg 78 says attach the pin T-38 directly to the speed dial. Which is right. If Pg...
  4. Factory Five Project 818
    Is there anybody building an electrically powered 818? (like a Tesla). Cees
  5. Factory Five Roadsters
    After 250 trouble / leak free miles I am having my first real problem. Went out to go for a ride on Sunday and 5385 wouldn't start. When I turn the key to on, I get a normal Alt light, turn to start, and the whole harness goes dead. Same thing happens if I turn the key to on, and place a...
  6. Factory Five Roadsters
    So I have started wiring up my car with the donor harness and there is a bunch of extra wiring that I would like to remove sooner rather then later. However using the wiring diagrams found in my Haynes manual isn't exactly instilling much confidence in me as to what is ok to remove and what has...
  7. Factory Five GTM Forum
    is it going to be a problem if i cut to shorten the length of the wires for the abs sensors? or if i was to loop the wires so compensate the slack will it make any interferiance noise? thank you very much.
  8. Factory Five Roadsters
    I'd like to wire up my footbox blowers on a multi speed arrangement (like the mustang's blower motor resistors). Does anyone know of a switch that looks similar to the FFR toggles, but would be an OFF-ON-ON or OFF-ON-ON-ON type configuration? Any suggestions on an appropriate Bakolite or...
1-8 of 8 Results