Factory Five Racing Forum banner
Nose Cone Mounts, Driver Side

Nose Cone Mounts, Driver Side

I put a short piece of 1/16 x 1/2 x 1/2 aluminum channel on the inside and the 1/8 x 3/4 x 3/4 aluminum angle on the outside of the Nose Cone so there is some reinforcement at the attachment fastiners. Then I made the brackets that attach it to the chassis from 1/8 x 1-3/4 aluminum flat bar.
There are no comments to display.

Media information

Category
Factory Five Roadster
Added by
CRZN 427
Date added
View count
2,872
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Top