Shark92651's MK4 Coyote Build #9327 - fully titled and registered
While my Kit is still about 3 weeks from delivery, I have actually started working on it already so I decided to go ahead and start a build thread so that I can consolidate all my updates and questions into a single thread. If you count the obsessive research I have been doing online, I guess you could say I have been "working" on it since December 2017. I attended the Mott Build School the weekend of 3/9 - 3/11, which I found to be excellent. I met a lot of cool people including a few more builders here in Texas.
I've always loved the Shelby Cobra as long as I can remember, and have thought about building a replica off and on over the years. I finally got my mind set that I was going to build a Factory Five roadster and with a tepid buy-in from the wife (she is coming around, or at least accepted it is inevitable now) it is on now. Besides, I was born in 1965 so it's like it was meant to be
Here is my planned build:
MK4 Complete Kit with IRS
Coyote 5.0L
Tremec TKO 600
Quicktime Bellhousing
Ford Performance Clutch
Tilton Hydraulic Release Bearing
KRC Power Steering
Koni single-adjustable shocks
13" Wilwood brakes
18" Halibrand Wheels
Stainless side pipes
Other Upgrades
Dual Breeze Stainless Roll Bars
Russ Thompson Trunk Box (yes I'm going to cut the diagonals)
Russ Thompson turn signals
Competition Gauge Layout
Leather Covered Dash w/ Glove Box
USB Charger, 12V adapter, Footwell Lights (hidden under dash)
Leather Removable Trans Tunnel Cover
Leather Bucket Seats
Leather Door Panels
LED Headlights, turn signals, tail/brake lights, dash indicators
Color is undecided at this point, probably one of the first items I ever thought about and will probably be the last decision I make.
I'm really looking forward to this process and want to thank everyone that has helped me already and those that will in the future. This forum and it's participants are an invaluable resource! My experience with working on cars in not very extensive. I have installed LED lighting in the front and rear of my truck, replaced a radiator on my Z3 I used to own several years ago, and some basic maintenance, but that is about it. I've done quite a few jobs around the house (electrical, plumbing, etc.) and ran network wiring and camera systems in two offices so I know my way around tools, oh and I am REAL good at Googling and YouTubing.
Here is my one-car garage where I will be building. It's a little tight, but I have 1/2 of the 2 car garage just across from this one to store my body and boxes of parts. Up to this point I've just been getting this work area ready.
I had a large monitor and a Chrome Box at the office that were not being used so I mounted them on the wall over one of my workbenches and connected to my home WiFi - this should be very useful.
While my Kit is still about 3 weeks from delivery, I have actually started working on it already so I decided to go ahead and start a build thread so that I can consolidate all my updates and questions into a single thread. If you count the obsessive research I have been doing online, I guess you could say I have been "working" on it since December 2017. I attended the Mott Build School the weekend of 3/9 - 3/11, which I found to be excellent. I met a lot of cool people including a few more builders here in Texas.
I've always loved the Shelby Cobra as long as I can remember, and have thought about building a replica off and on over the years. I finally got my mind set that I was going to build a Factory Five roadster and with a tepid buy-in from the wife (she is coming around, or at least accepted it is inevitable now) it is on now. Besides, I was born in 1965 so it's like it was meant to be
Here is my planned build:
MK4 Complete Kit with IRS
Coyote 5.0L
Tremec TKO 600
Quicktime Bellhousing
Ford Performance Clutch
Tilton Hydraulic Release Bearing
KRC Power Steering
Koni single-adjustable shocks
13" Wilwood brakes
18" Halibrand Wheels
Stainless side pipes
Other Upgrades
Dual Breeze Stainless Roll Bars
Russ Thompson Trunk Box (yes I'm going to cut the diagonals)
Russ Thompson turn signals
Competition Gauge Layout
Leather Covered Dash w/ Glove Box
USB Charger, 12V adapter, Footwell Lights (hidden under dash)
Leather Removable Trans Tunnel Cover
Leather Bucket Seats
Leather Door Panels
LED Headlights, turn signals, tail/brake lights, dash indicators
Color is undecided at this point, probably one of the first items I ever thought about and will probably be the last decision I make.
I'm really looking forward to this process and want to thank everyone that has helped me already and those that will in the future. This forum and it's participants are an invaluable resource! My experience with working on cars in not very extensive. I have installed LED lighting in the front and rear of my truck, replaced a radiator on my Z3 I used to own several years ago, and some basic maintenance, but that is about it. I've done quite a few jobs around the house (electrical, plumbing, etc.) and ran network wiring and camera systems in two offices so I know my way around tools, oh and I am REAL good at Googling and YouTubing.
Here is my one-car garage where I will be building. It's a little tight, but I have 1/2 of the 2 car garage just across from this one to store my body and boxes of parts. Up to this point I've just been getting this work area ready.
I had a large monitor and a Chrome Box at the office that were not being used so I mounted them on the wall over one of my workbenches and connected to my home WiFi - this should be very useful.