Unfinished/unstarted MK4 kit for sale - FFCars.com : Factory Five Racing Discussion Forum
LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 07-14-2019, 07:22 PM Thread Starter
Beaudog's Avatar
Join Date: Oct 2014
Location: Bay Area, Calif.
Posts: 35
Unfinished/unstarted MK4 kit for sale

Greetings FFR fans and builders,

Here’s a list of what comes in this Mk4 Complete Kit I am selling.
Why am I selling this kit?

Divorce forces sale!!!
My loss is your gain.

50% savings = $29,341.66 value for $14,670.83‬

Yes, I have all the receipts for this project, original kit purchase, Levi Racing (thanks Gordon), American Racing Headers, Ford, Breeze Automotive (thanks Mark and Tina) & Rear-End Shop (Thanks Barry in Livermore, Ca.)
I will update this post with more detail moving forward. Just wanted to get it out there!

Complete 4” round tube frame. Including all mounts ready to accept small block Ford, custom modifications (e.g., hidden hood hinge kit, HD anti-roll bars, enlarged pedal boxes, enlarged trunk, etc.), all powder-coated gloss metallic-flake grey & black (very classy)

Kit was ordered to accept a small-block Ford engine.

Includes unfinished 3-point roll bar

Hand laid 3/16” laminate composite body and panels made with vinylester resin.
Driver and passenger doors with molded door liners and integral steel door frames
Hood with molded hood liner, and separate hood scoop
Trunk with molded trunk liner and improved mount face for license plate light
Adhesive backed and foam weather--strip
C-channel door edge trim and fasteners
Plastic end caps and body fasteners
Trunk and engine bay seal, push on rubber bulb seal
Rubber hood and trunk bumpers
Includes multi-adjustable door hinges with bronze bushings and fasteners
Includes adjustable hidden trunk hinge kit, hinge mount plates and fasteners
Includes custom hidden hood hinge kit with supplied by vendor
Original quick-jack comp bumpers with stainless steel sleeves and fasteners

Chassis Aluminum Panels:
Includes 42 laser cut, pre-formed 6061-T6 aluminum panels for cock pit, trunk, and engine bay.
1,200 pre-packaged rivets; 1/8” and 3/16” short and long
Complete MK4 cockpit aluminum with block-off plates and covers
Engine bay aluminum assembly with aluminum nose sections and splash guards

Complete Front Suspension:
Unequal length A-arm control arms with coil-over shock suspension. Comes complete with all components and fasteners.
KONI brand high-performance mono-tube, rod-end shock absorbers
Coil-over kit for KONI dampers including spring hat, threaded seat and 500 lb. black powdercoated springs
Adjustable upper control arms with ball joints and fasteners
Lower tubular control arms with ball joints and fasteners
Levi Racing 1.5” Sway bars

Rear Suspension:
Our 3-link rear suspension option include rear axle brackets, fasteners and axle straps to mount your Mustang 8.8” rear solid axle and brakes. Comes with all hardware required for installation.
FFR Deluxe 3-Link suspension kit with rear-end brackets, upper link kit, and fasteners, including panhard bar kit with rod-ends and grade 8 fasteners
KONI brand high performance mono-tube, rod-end shock absorbers
Coil-over kit for KONI dampers including spring hat, threaded seat and 350 lb. black powdercoated springs
Factory Five tubular rear lower control arms with polyurethane bushings and fasteners
Or select our 2015 Mustang independent rear suspension option includes:
Welded tubular steel IRS frame
Upper and lower control arms with bushings, grease fittings, and fasteners, powdercoated gloss black
Left and right IRS toe adjustment arms with rod ends and fasteners, powdercoated gloss black
KONI coil-over shocks with coil-over kit, springs, and fasteners
Right and left CV axles
Rear wheel studs
IRS e-brake cable adapter
Differential mounting components, bushings, and fasteners
Driveshaft adapter for manual cast iron center section
Levi Racing 1.5” Sway bars

Brake Kit:
Wilwood custom yellow 6-piston front calipers
Wilwood custom yellow 4-piston rear calipers
Master cylinder stainless braided brake lines front with mount clips, banjo bolts and brake line mounting fasteners
Pre-flared 3/16” brake line and brake line T-adapter
Complete custom purchased emergency brake handle assembly with leather boot and fasteners

Complete Steering System:
Complete steering system using 15:1 manual rack from Levi Racing and fasteners to vintage steering wheel and badges; collapsible design.
Polyurethane steering rack bushings and fasteners
Rack shaft adapter 9/16-26 spline
Nickel plated lower steering shaft (fully welded U-joints)
Steering bearings and hardware, including flange bearing, pillow block bearing and fasteners

Complete Fuel System/Parts:
OEM fuel tank purchased from Levi Racing with custom stainless-steel mounting straps and hardware, vents, gaskets, pick-up and fuel level sending unit
Fuel lines, connectors, and filler neck
Pre-flared fuel lines (1/4” and 5/16”) with unions, barbs, hose clamps and high-press flex lines and fasteners
Aston LeMans style polished aluminum fuel cap with integral pressure cap, gaskets, ground strap, fuel hose to tank with fasteners
3/8” line, fuel filter, and connectors

Complete Cooling System/Parts:
Electric cooling fan and mounting hardware, radiator hoses, and fasteners.
Electric cooling fan and mounting kit
Aluminum radiator with cap and in-line filler neck
Radiator mount kit and fasteners
Stainless steel radiator hose kit including adapter kit, fasteners and hose
Stainless overflow tank with cap, hoses, hose clamps and mounting hardware
185 degree thermostat switch and wiring

Engine Accessories/Side Exhaust:
The Mk4 base kit is configured to accommodate some big block Ford engines, small block Ford windsor engines, and modular 4.6L and the 5.0L Coyote engine. Kit comes with alternate drive pulley assembly, oil filter relocate kit, and exhaust assembly to adapt Mustang engine and headers to vintage side exit exhausts.
4-into-1 side exhaust headers (small block ford, Windsor), bare steel with rubber hanger brackets, gaskets and fasteners purchased from American Racing
J-pipe header-to-side exhaust adapter, optional catalytic converter replaces this part. Full tubular headers are also an available option
Oil filter relocate mount with fittings, hoses, barbs and fasteners
Spin-on engine block adapter
Alternate drive pulley, spacer, pulley wheel and fasteners
SB performance air filter, conical
Accelerator cable assembly: Includes the cable, return spring and retainer

Custom fabricated 31 spline 10.375” driveshaft by Driveshaft Specialties (Tremec TKO500 and Small block Ford)

Gauges, Dash, and Electrical Assembly:
Custom fit chassis wiring harness purchased from Levi Racing.
Complete assembly comes with covered aluminum dash, dash buttons, toggles and indicator lights, switches, and horn.
MK4 pre-cut aluminum dashboard with fasteners
Padded dash cover, black vinyl
Ignition switch with FFR keys, headlight switch, three-position turn signal switch, starter solenoid and horns
Red, green, and blue dash lights
Wiring harness mounting kit and hardware includes fuse panel mount
Insulated line clip hardware and fasteners
Cable ties, wire loom and grommets
On/off switch, horn button, flasher and all connectors
Battery ground strap
Trunk mount battery hardware, cables and hold-downs with fasteners.
Speedometer sending unit, pigtail, fasteners and speedometer gear
Complete set of seven Autometer electronic gauges, with connectors, terminals and installation kit, which includes the following gauges:
Speedometer (American Racing)
Oil Pressure Gauge
Water Temperature Gauge
Fuel Level Gauge
Oil Temperature Gauge

Complete Interior Accessories:
This MK4 Complete kit comes with all the interior accessories you need. Authentic style seats, door latches, toggles, rear view mirror, and more complement the dash and gauges assembly for a full interior that is period correct. Check out this full list of standard parts and assemblies.
Authentic roadster metal framed seats, black teather with fasteners
5-point Simpson brand harnesses. 3” wide driver and passenger, frame mounted with fasteners
Complete cockpit carpet set, black all-weather
Authentic interior rear view mirror with fasteners
Original style door latches, fasteners and leather check straps
Authentic stainless shifter handle, shift knob, boot, polished ring and fasteners

Exterior Accessories and Lighting:
Along with the goodies on the inside of the car, the MK4 complete kit is loaded with the right parts on the outside.
Authentic chrome-on-brass vintage windscreen, tinted with side bars and fasteners; DOT safety glass compliant
Authentic style three-lock set including T-trunk handle, L-shaped hood handles, matching keys, cam wedges, fasteners, latch pin sleeves and plastic end cap
Authentic license plate light and bracket with fasteners
High-quality laser-cut aluminum side louvers
Ceramic FFR badging nose and tail
Original style headlamp assemblies, including buckets, halogen headlamps, trim rings, and fasteners
Original style British front amber turn signals, and red rear tail-lights
All lighting is DOT-approved
Authentic bullet style sideview mirror
Complete Pedal Box and Components:
Leaving the Mustang pedal box behind, the complete MK4 kit utilizes the proven Wilwood brand pedal box with fasteners and all the required ancillary parts
Wilwood pedal box with adjustable pedals and mounting hardware
Master cylinders, clutch quadrant, clutch cable, threaded firewall adjuster
Accelerator pedal, accelerator cable, return spring and ball stud retainer, with fasteners
Brake line adapters and T-fittings

Oil Filter Relocater/Alternate Drive Pulley Assemblies:
An oil filter relocation kit comes with all hoses and hardware
Oil filter relocation mount with fittings, hoses, barbs and fasteners
Spin-on engine block adapter
Alternate drive pulley, spacer, pulley wheel and fasteners
Air filter, conical
Fan belt, six rib

More than 1,500 top quality zinc plated, chrome and stainless steel USS and SAE fasteners, numbered and packed individually by assembly.
MK4 Roadster Complete Kit Assembly Manual

Beaudog is offline  
Sponsored Links
post #2 of 2 (permalink) Old 07-15-2019, 03:19 PM
Junior Member
Join Date: Jun 2015
Posts: 20
Pm'd you and sorry to hear about your situation

norcalLmo is offline  
Sponsored Links


Quick Reply

Register Now

In order to be able to post messages on the FFCars.com : Factory Five Racing Discussion Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Currently Active Users Viewing This Thread: 2 (1 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome


Welcome to FFCars! The representations expressed are the representations and opinions of the FFCars.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Factory Five Racing, Inc. or Ford Motor Company. This website has been planned and developed by FFCars.com and its forum members and should not be construed as being endorsed by Factory Five Racing, Inc. or Ford Motor Company for any purpose. "FFR", "Factory Five", "Factory Five Racing", and the Factory Five Racing logo are registered trademarks of Factory Five Racing, Inc. FFCars.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting the FFCars.com Forum dedicated to Factory Five.